This adapter is used as a COMx serial interface and connects fiber interfaces to a PC or laptop. It can be used for all PC baud rates up to 40 kBaud.
A virtual COM interface is created in the PC. All serial data going to and from this are sent directly to the fiber optic cable. The COM interface can be used together with the driver on MS Windows without limitations.
No modem control signals are supported. DTR, CTS, DSR, DCD have no effect. Only XON / XOFF protocols created in the driver or application-specific protocols can be used for flow control.
Accessories
USB cable A-B and USB driver CD (included)
This adapter is used as a COMx serial interface and connects fiber interfaces to a PC or laptop. It can be used for all PC baud rates up to 40 kBaud.
A virtual COM interface is created in the PC. All serial data going to and from this are sent directly to the fiber optic cable. The COM interface can be used together with the driver on MS Windows without limitations.
No modem control signals are supported. DTR, CTS, DSR, DCD have no effect. Only XON / XOFF protocols created in the driver or application-specific protocols can be used for flow control.
Accessories
USB cable A-B and USB driver CD (included)
| Technical data |
|---|
| Dimensions | W x H x D 40 x 75 x 20 mm |
| Assembly | Plastic case, can be freely positioned |
| Weight | Approx. 35 g |
| Operating temperature | -20°C ... + 55°C |
| IP protection | IP20 |
| Power supply | USB bus powered < 100 mA |
| Interfaces | 1 USB socket, 2 FOC sockets |
| EMC | EMC susceptibility: according to EN 61000-6-2
EMC interference emission: according to EN 61000-6-4 |
| USB | USB 2.0 Full Speed |
| Transmission cable | Plastic fiber optic cable |
| Transfer rate | 0 .. 38400 Baud |
| Maximum segment length | 100 m |
