This CPU module connects input and output modules with the Ethernet. Modules which are connected on the right side will be automatically recognized and a process image will be created according to their sequence.
This module can be programmed using IEC1131 (ST, SFC, FBD, LD).
Various protocols are available for communication on the Ethernet. The TCP/IP protocol is for data transfer and programming, the HTTP protocol is for reading data with a web browser and the BootP protocol is for assigning the module an IP address.
This CPU module connects input and output modules with the Ethernet. Modules which are connected on the right side will be automatically recognized and a process image will be created according to their sequence.
This module can be programmed using IEC1131 (ST, SFC, FBD, LD).
Various protocols are available for communication on the Ethernet. The TCP/IP protocol is for data transfer and programming, the HTTP protocol is for reading data with a web browser and the BootP protocol is for assigning the module an IP address.
| Technical Data |
|---|
| Dimensions | W x H x D 22.5 X 99 X 114.4 mm |
| Installation | Top-hat rail NS 35 |
| Weight | 152 g |
| Operating temperature | 0°C ... + 45°C without condensation |
| IP protection | IP20 |
| Supply | Via module bus |
| Connection | RJ-45 |
| EMC | Susceptibility according to EN 61000-6-2
Interference emission according to EN 50081-1 |
| Number of I/O modules | max. 32 |
| Cable length | 100 m (according to Ethernet specification) |
| Transfer rate | 10/100 Mbit/s |
| Protocols | TCP, HTTP, BOOTP, ICMP, ARP |
| Main memory | 128 MB |
| Program memory | 8 MB |
| Non-volatile memory | 32 kB |
| IEC cycle time | min. 1 ms |
