These LED display modules are designed for indoor and outdoor use. They are perfectly suitable for passenger information systems in train stations or at bus or tram stops, for park and ride information boards or information boards on access roads. The modules are characterized by their low installation depth.
The matrix consists of 16 x 16 LED modules. The smallest distance between the LEDs is 4 mm, which results in an edge length of 64 mm. The matrix can be created using an arbitrary combination of length and height. A construction of up to 1024 modules with a maximum refresh rate of 100 Hz is possible. The sensors integrated in the matrix allow the automatic adjustment of the display's brightness with relation to the surrounding light.
The module has a low installation depth. It is only 25 mm when used on one side of a sign, if double-sided, only 37 mm in total.
The display matrix is installed in a waterproof case with safety glass for outdoor use. The case dimensions can be adjusted to the customer's needs. The module is controlled via a serial interface. An additional module allows data supply via the internet.
The module can be used at public transport stops to show when the next bus or tram will be arriving, such as in the photo. The device is controlled by a decentralized computer, for example, the microcomputer deKR16.
These LED display modules are designed for indoor and outdoor use. They are perfectly suitable for passenger information systems in train stations or at bus or tram stops, for park and ride information boards or information boards on access roads. The modules are characterized by their low installation depth.
The matrix consists of 16 x 16 LED modules. The smallest distance between the LEDs is 4 mm, which results in an edge length of 64 mm. The matrix can be created using an arbitrary combination of length and height. A construction of up to 1024 modules with a maximum refresh rate of 100 Hz is possible. The sensors integrated in the matrix allow the automatic adjustment of the display's brightness with relation to the surrounding light.
The module has a low installation depth. It is only 25 mm when used on one side of a sign, if double-sided, only 37 mm in total.
The display matrix is installed in a waterproof case with safety glass for outdoor use. The case dimensions can be adjusted to the customer's needs. The module is controlled via a serial interface. An additional module allows data supply via the internet.
The module can be used at public transport stops to show when the next bus or tram will be arriving, such as in the photo. The device is controlled by a decentralized computer, for example, the microcomputer deKR16.
| Technical data |
|---|
| Dimensions | Modules:
with 256 LED (16 x 16)
At 4 mm LED spacing, the module size is 64 mm x 64 mm
Maximum size: 1024 modules in arbitrary arrangement
Installation depth: 25 mm single-sided, 37 mm double-sided
|
| Display | Multiple lines, static or scrolling text |
| Aperture angle LED | 120° |
| Brightness | 200 mcd / LED, adjusted to surrounding light |
| Refresh rate | Up to 100 Hz |
| Assembly | In a waterproof case with safety glass, IP64 |
| Power supply | 230 V |
| Interfaces | RS422 |
| EMC | According to DIN EN 50293:2002 EMC Road traffic signal systems |
