This power supply module features two DC/DC converters for creating the necessary operating voltage of +5V and +12V for the MST32 module.
The module generates a power fail signal if the power supply goes below the minimum power needed. It also supports the +5V power at its maximum load for at least 2ms.
The operating voltages are short circuit protected and show they are in standby with an LED.
The power supply is protected against reverse polarity.
A sense line allows the compensation of voltage drop when a large number of modules are connected.
Accessories
Screw coupling terminal (Article no. 10638)
Multipoint connector for sense line for MST32 (Article no. 8321)
Spring clip 4 pin (Article no. 18019)
This power supply module features two DC/DC converters for creating the necessary operating voltage of +5V and +12V for the MST32 module.
The module generates a power fail signal if the power supply goes below the minimum power needed. It also supports the +5V power at its maximum load for at least 2ms.
The operating voltages are short circuit protected and show they are in standby with an LED.
The power supply is protected against reverse polarity.
A sense line allows the compensation of voltage drop when a large number of modules are connected.
Accessories
Screw coupling terminal (Article no. 10638)
Multipoint connector for sense line for MST32 (Article no. 8321)
Spring clip 4 pin (Article no. 18019)
| Technical Data |
|---|
| Dimensions | W x H x D 45 x 99 x 114.4 mm |
| Assembly | Top-hat rail NS 35 |
| Weight | 245 g |
| Operating temperature | - 25°C ... + 55°C without condensation |
| IP protection | IP20 |
| Power supply | 24 VDC |
| Outputs | +5 V / 25 W
+12 V / 12 W |
| Connections | Screw coupling terminals 0.2 .. 2.5 mm |
| EMC | Susceptibility according to EN 61131-2:2003
Interference emission according to EN 61131-2:2003 |
| Safety | Reverse polarity protection, short circuit proof, internal fuse |
