This digital input and output module features 8 input and 2 output channels.
Each input can process signals ranging from 0V to +36V and shows the signal status using an LED.
The input signals are read as binary information and are shifted via the module bus to the bus coupler or the controller.
All input channels use a common mass potential, the ground (GND).
Each output features a relay change-over contact and has an LED which indicates the signal status.
The outputs are galvanically separated. They are controlled via the module bus by a controller or bus coupler.
Accessories
Screw coupling terminal (Article no. 10638)
(4 screw coupling terminals included)
This digital input and output module features 8 input and 2 output channels.
Each input can process signals ranging from 0V to +36V and shows the signal status using an LED.
The input signals are read as binary information and are shifted via the module bus to the bus coupler or the controller.
All input channels use a common mass potential, the ground (GND).
Each output features a relay change-over contact and has an LED which indicates the signal status.
The outputs are galvanically separated. They are controlled via the module bus by a controller or bus coupler.
Accessories
Screw coupling terminal (Article no. 10638)
(4 screw coupling terminals included)
| Technical data |
|---|
| Dimensions | W x H x D 22.5 X 99 X 114.4 mm |
| Installation | Top-hat rail NS 35 |
| Weight | 140 g |
| Operating temperature | -25°C ... + 55°C without condensation |
| IP protection | IP20 |
| Supply | Via module bus |
| Connections | Screw coupling terminals 0.2 .. 2.5mm |
| EMC | Susceptibility according to EN 61131-2:2003
Interference emission according to EN 61131-2:2003 |
| Bit width in process image | 1 x 8-bit input
1 x 2-bit output |
| Inputs | 8 |
| Outputs | 2 |
