Radio Controller Board RCB230SMA V3.3.1

The Radio Controller Board RCB230SMA V3.3.1 is an affordable, high-performance radio module based on the 2.4 GHz radio transceiver AT86RF230 [datasheet] combined with Atmel's low power AVR microcontroller ATmega1281V [datasheet].

The RCB230SMA V3.3.1 module can be used for wireless solutions in accordance with the standard IEEE 802.15.4 for ISM and ZigBee^TM applications.

The module has no integrated antenna, instead, it has an SMA interface for an external antenna. In order to reduce interference and unwanted radiation, the module has an RF screen, allowing multiple radios to be in operation at one location using cable and attenuators. High shielding effectiveness eliminates the possibility of communication without using the cable.

The module's transmitting power is 3 dBm and its receiving sensitivity is -100 dBm. Its range depends on the antenna used. The module's 60 pin interface allows for flexible operation and use of all of the ATmega1281V components and because of this, quick realization of different tasks.

Power is supplied either by 2 AAA batteries or the 60 pin interface and operates in the range of 1.8..3.6 VDC. Energy consumption is approximately 25 mA in sending and receiving mode and less than 1 µA in standby. The module features a 32 kHz low power timer.

Accessories:
Antenna 2.4 GHz
Recommended connectors 30-pin:
- SAMTEC TFM-115-02-S-D (available at Farnell, article no. 1690087)
- Tyco 5-104655-4 (available at Farnell, article no. 1106324 or RS Components, article no. 406-893)

Using the following evaluation boards made by dresden elektronik this radio controller board (RCB) can be started quickly:
Sensor Terminal Board (RCB)
RCB Breakout Board
RCB Breakout Board light

Further radio boards from dresden elektronik
- Further radio boards with transceiver and microcontroller can be found under Radio Controller Boards.
- Radio boards without microcontrollers can be found under Radio Extender Boards.

The Radio Controller Board RCB230SMA V3.3.1 is an affordable, high-performance radio module based on the 2.4 GHz radio transceiver AT86RF230 [datasheet] combined with Atmel's low power AVR microcontroller ATmega1281V [datasheet].

The RCB230SMA V3.3.1 module can be used for wireless solutions in accordance with the standard IEEE 802.15.4 for ISM and ZigBee^TM applications.

The module has no integrated antenna, instead, it has an SMA interface for an external antenna. In order to reduce interference and unwanted radiation, the module has an RF screen, allowing multiple radios to be in operation at one location using cable and attenuators. High shielding effectiveness eliminates the possibility of communication without using the cable.

The module's transmitting power is 3 dBm and its receiving sensitivity is -100 dBm. Its range depends on the antenna used. The module's 60 pin interface allows for flexible operation and use of all of the ATmega1281V components and because of this, quick realization of different tasks.

Power is supplied either by 2 AAA batteries or the 60 pin interface and operates in the range of 1.8..3.6 VDC. Energy consumption is approximately 25 mA in sending and receiving mode and less than 1 µA in standby. The module features a 32 kHz low power timer.

Accessories:
Antenna 2.4 GHz
Recommended connectors 30-pin:
- SAMTEC TFM-115-02-S-D (available at Farnell, article no. 1690087)
- Tyco 5-104655-4 (available at Farnell, article no. 1106324 or RS Components, article no. 406-893)

Using the following evaluation boards made by dresden elektronik this radio controller board (RCB) can be started quickly:
Sensor Terminal Board (RCB)
RCB Breakout Board
RCB Breakout Board light

Further radio boards from dresden elektronik
- Further radio boards with transceiver and microcontroller can be found under Radio Controller Boards.
- Radio boards without microcontrollers can be found under Radio Extender Boards.

Technical data
Dimensions	53 x 51.5 mm
Control and display elements	1 button (freely programmable) 3 LEDs (freely programmable)
Power supply	2 AAA batteries (1.8 - 3.6V)
Power consumption	Active: 25 mA Power down: <1 µA
Interfaces	2 x 30 PIN I/O connector SMA antenna interface (50 Ohm)
Range	Depends on antenna
Frequency range	2.4 GHz
Transmitting power	3 dBm
Receiver sensitivity	-100 dBm
Communication standard	IEEE 802.15.4
Microcontroller	Atmel ATmega1281V [datasheet]
Transceiver	Atmel AT86RF230 [datasheet]
Board information on EEPROM	- MAC address - Serial number - Calibration values - Board model information