The Radio Extender230 V2.3 is an affordable wireless module based on the 2.4 GHz radio transceiver circuit AT86RF230
[
datasheet].
The Radio Extender 230 V2.3 is connected directly to the
Atmel STK500-Board using a 40 pin plug and using the REB to STK600 adapter to the
Atmel STK600-Board . It allows the fast and simple starting, programming and evaluation of the transceiver AT86RF230. Wireless connections in the 2.4 GHz ISM band according to the IEEE standard 802.15.4 and ZigBee
® applications can be easily set up, tested and diversified.
This transceiver supports many Atmel microcontrollers such as ATmega2561, ATmega2560, ATmega1281, ATmega1280, ATmega644, ATmega324 and ATmega164.
The transmitting power is 3 dBm and receiving sensitivity is -100 dBm. The data rate is 250 kBps. The range depends on the antenna used. The power supply needed is between 1.8 and 3.6 V, and by connecting a measuring device the power consumption can be measured. While sending and receiving, power consumption is approximately 15 mA and in standby less than 1 µA.
It is simple to connect antennas or measuring devices using the integrated SMA socket.
Components:
Antenna 2.4 GHz
Accessories:
REB to STK600 Adapter
REB to SAM7EK Adapter
REB to SAM9EK Adapter
Further Radio Extenders from dresden elektronik
- Further Radio boards without microcontrollers can be found under
Radio Extender Boards.
- Boards with transceiver and microcontroller can be found under
Radio Controller Boards.
The Radio Extender230 V2.3 is an affordable wireless module based on the 2.4 GHz radio transceiver circuit AT86RF230
[datasheet].
The Radio Extender 230 V2.3 is connected directly to the
Atmel STK500-Board using a 40 pin plug and using the REB to STK600 adapter to the
Atmel STK600-Board . It allows the fast and simple starting, programming and evaluation of the transceiver AT86RF230. Wireless connections in the 2.4 GHz ISM band according to the IEEE standard 802.15.4 and ZigBee
® applications can be easily set up, tested and diversified.
This transceiver supports many Atmel microcontrollers such as ATmega2561, ATmega2560, ATmega1281, ATmega1280, ATmega644, ATmega324 and ATmega164.
The transmitting power is 3 dBm and receiving sensitivity is -100 dBm. The data rate is 250 kBps. The range depends on the antenna used. The power supply needed is between 1.8 and 3.6 V, and by connecting a measuring device the power consumption can be measured. While sending and receiving, power consumption is approximately 15 mA and in standby less than 1 µA.
It is simple to connect antennas or measuring devices using the integrated SMA socket.
Components:
Antenna 2.4 GHz
Accessories:
REB to STK600 Adapter
REB to SAM7EK Adapter
REB to SAM9EK Adapter
Further Radio Extenders from dresden elektronik
- Further Radio boards without microcontrollers can be found under
Radio Extender Boards.
- Boards with transceiver and microcontroller can be found under
Radio Controller Boards.
