USB Radio Sticks

Key Features

  • 23 x 71 x 8.7 mm (with case)
  • Powerful 32-bit ARM Cortex-M3 MCU
  • Optional: Combined USB radio and memory stick with 2 GB Flash
  • Sub-GHz transceiver AT86RF212 with up to 1 Mbit/s data rate / 2.4 GHz transceiver AT86RF231 with up to 2 Mbit/s data rate
  • Chip ceramic antenna
  • ETSI, FCC certified (only for 2.4 GHz versions)

deRFusb

The USB radio stick simplifies the connection of a PC with an IEEE 802.15.4 based wireless sensor network. The stick can represent a virtual serial interface on the PC which enables your access to the network using the PC. Individual nodes can now be easily activated and parameterized and all network communication can be coordinated in the sub-GHz and 2.4 GHz frequency range.

deRFusb
Version Transceiver Range Special Frequency
13E00 AT86RF212 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
13E00 JTAG AT86RF212 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
13E06 AT86RF212 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
13E06 JTAG AT86RF212 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
23E00 AT86RF231 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
23E00 JTAG AT86RF231 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
23E06 AT86RF231 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
23E06 JTAG AT86RF231 200 m JTAG Flash Sub-GHz 2.4 GHz Shop
  • JTAG JTAG Programming/debug interface
  • Flash 2 GB external Flash

Versions

In the basic versions the USB radio sticks are available with or without integrated Flash memory. With a memory capacity of 2 GB it is large enough to store all drivers, documentation, application data which can be used by the customer immediately. 

  • For software development with JTAG
  • For application with case without JTAG
  • For network analysis with firmware for Perytons trial license

Software

The stick without JTAG is delivered without preinstalled firmware so that firmware can be installed once via USB using Atmel’s SAM-BA tool. 
The option with JTAG can, for example be applied as a wireless UART direct connection between two PCs. Powerful network layer such as  ZigBee are possible.

Certification

The USB radio sticks for the 2.4 GHz frequency range are CE compliant and certified according to ETSI as well as to FCC and are thus applicable worldwide.

Customized for you: 

Customer-specific firmware can be pre-installed and the stick can be delivered as a finished product with the case closed and including an individual label for large quantities upon request.